SPECIFICATION |
F11 100A |
F11 125A |
F11 160A |
F11200A |
Center Height mm
|
100 |
125 |
160 |
200 |
Swivel angle of spindle from it's horizontal position (upward)
|
≤95° |
Horizontal position(downward) |
≤5°
|
Rotating angle of spindle for one complete revolution of dividing handle
|
9°(540 GRAD;1'each |
Min. reading of vernier |
10" |
Worm gear ratio |
1:40 |
Taper of spindle bore |
MT3 |
MT4 |
Width of locating key mm |
14 |
18 |
Dia. Of short taper of spindle nose for mounting flange mm
|
41.275 |
53.975 |
Hole numbers on index plate |
1st plate |
24,25,28,30,34,37,38,39,41,42,43 |
2nd plate |
46,47,49,51,53,54,57,58,59,62,66 |
Change gear |
Module |
1.5 |
2 |
teeth numbers |
25,30,35,40,50,55,60,70,80,90,100 |
Individual indexing error of the spindle for one complete revolution of dividing handle |
±45" |
Cumulate error at any 1/4 periphery of spindle |
±1' |
Max.bearing (kg)
|
100 |
130 |
130 |
130 |
Net weight(kg) |
67 |
101.5 |
113 |
130 |
Gross weight(kg) |
79 |
111.5 |
123 |
140 |
Packing size(mm) |
616x465x265 |
635x530x530 |
710x535x342 |
710x535x342 |