Product Details
Full Serial DCVV Control Cabinet
The control function of the full series DCVV control cabinet is achieved by its STEP full serial elevator control system. The elevator control cabinet supports many control modes such as duplex, group control, remote control, etc. By adopting CAN-Bus serial communication, the wiring cost is reduced due to less cable used, while the elevator is safer and more reliable.
The electric drive uses a MENTOR II DCVV speed regulator produced by British CT, and there is no need for electric generator set. By changing the voltage on the brush of the motor, the motor speed can be modulated. Hence, an elevator controlled by the DCVV control cabinet offers a comfortable feeling, improved operation efficiency and reduced energy consumption. The full serial DCVV control cabinet uses an absorption circuit and a DC reactor to greatly reduce the operation noise. Our control cabinet is suitable for different kinds of DC elevators.
Parameters of the Full Serial DCVV Control Cabinet
Rated elevator speed |
Less than 6.3m/s |
Power range |
15-75kW |
Power supply |
AC 360-460V, 50/60Hz, 3 phase |
Frequency inverter |
CT DC frequency inverter |
Applicable motor |
DC motor |
Landing method |
Direct landing |
Landing accuracy |
Less than ±3mm |
Machine room heat dissipation |
No need |
Energy saving performance |
Greater than 60% compared with electric generator set |
Safety standard |
GB7588, EN-81 |
Dimension |
800mm*1740mm*382mm |
As a China-based full serial DCVV control cabinet manufacturer, our company also provides VVVF escalator control cabinet, elevator group control system, elevator main controller board, general vector inverter, and more.
Features
1. Assembled with a full serial control system, our VVVF control cabinet is able to fulfill multiple humanized functions such as duplex control, group control, remote monitoring, emergency rescue, etc.
2. The excellent VVVF drive system assembled in our full serial VVVF operating box ensures higher stability of the elevator and offers a better elevator travelling experience to passengers.
3. CAN bus serial communication method greatly reduces the quantity of cable cores and saves the cost spent on wiring.
Technical Parameters of Full Serial VVVF Control Cabinet
Power Supply: AC380V~460V, 50/60Hz, 3 phase
Power Range: 5.5kW~22kW
Rated Speed: ≤ 3.5m/s
Main Controller of VVVF Elevator Operating Device: STEP SM-01-F5021 board
Safety Standard: GB7588/EN-81
Landing Method: Direct landing
Landing Accuracy: ≤±3mm
Environment Temperature: -10°C~ 45°C
Cabinet Color: Dark gray or customized
Standard Control Cabinet Dimension (mm): 1500×650×382
Resistor Box Dimension: 420×255×117~420×255×255
Interface of Full Serial VVVF Control Cabinet
Power Interface: 16mm2 crimp terminal
Adapted Inverter: STEP iAstar-AS320 Driver
Adapted Motor: AC asynchronous motor/PM synchronous motor
Encoder: Open-collector, push-pull, differential
Encoder Interface: Standard DB15 plug for synchronous motor; terminal for asynchronous motor
Brake: DC110V/DC220V/AC220V; Rated current ≤6A; Interface: 2.5mm2 crimp
terminal
Door Motor: AC220V VVVF operator
Switches in Machine Room: Governor, upward overspeed protection (which for asynchronous motor), manual wheel, motor side EM-stop and emergency power running switches
Switches in Shaft: Terminal limit switch, buffer switch, rope brake switch, pit
EM-stop switch and deceleration switch (except limit switch)
Switches on Car Top: Car EM-stop switch, car top EM-stop switch, safety gear, landing sensor, over-load, light-load, full-load switch (car bottom without
power supply type), light curtain switch, safety edge switch and arrival gong
switch (electronic type)
Light Power Supply: AC220V for car top and pit, AC36V for car top
Intercom System of Full Serial VVVF Control Cabinet: Five-party (4-line type)
Cable Plug: AMP brand
Rescue Device: Automatic rescue device (ARD); Electric brake releasing device:
Crimp terminals are in the size of 16mm2 and 2.5mm2.
Travelling Cable: 40 cores flat cable--TVVBP40/36×0.75+2×2P×0.75+1×2.0 (standard
function system)
Communication Cable: 4 cores round cable-- RVVP4/2×2×0.75
Door Lock Cable: 3 cores round cable-- RVV3/2×0.75+1×2.0
Shaft Switch Cable: 25 cores round cable--RVV25/24×0.75+1×2.0 (standard function
system)
As one of the leading manufacturers and suppliers of full serial vvvf passenger elevator control cabinet in China, we warmly welcome you to buy our quality and durable full serial vvvf passenger elevator control cabinet with competitive price. We will offer you good after-sale service and fast delivery.
http://www.yixin-international.com/